HZ-3E-100Z170 Sand Pump (High Head) | 304 Stainless Steel
The hydraulic sewage pump is widely used in municipal pipeline dredging sewage, urban flood control and drainage, sewage treatment, and emergency drainage on the construction site. It can pump and transport sewage, mud, slurry, oil and other flowing liquids.
Classification:
Keywords:
Product Parameters
Hydraulic maximum working pressure
No more than 20mpa
Do not exceed the maximum allowable
Granularity used in the environment
Don't long
overload use
1 year warranty for non-human damage
6 months warranty for wearing parts
Product Features
High power hydraulic motor drive, large displacement, high lift;
● This product is cooled and lubricated by hydraulic oil, dry operation without damage;
●Using stainless steel pump body, high strength alloy casting impeller, wear resistance, corrosion resistance, impact resistance, good toughness;
● Drive shaft selection of dual-phase stainless steel, imported bearings, combined seal structure, strong power, high configuration, stable performance;
Special design of the impeller, through the particles, not easy to card pump;
●Good insulation and explosion-proof performance, hydraulic drive is non-conductive, does not produce electric sparks, and can work in flammable and explosive environments;
The pump body is small in size, light in weight, easy to carry, and is not limited by the space and environment of the construction site;
● Use hydraulic quick connector connection, convenient and quick. The water outlet and drain pipe are connected by quick connectors, without tools, and can be connected and disassembled directly and manually.
Scope of application
● Flow Q: 30m3/h~100m3/h
● Head H:1m ~ 75m
Water pump steering
Counterclockwise as seen from the direction of the inlet
Maintenance
● Bearing oil and seal oil need to be replaced every 3 months;
● After each work, the machine should be put into the clean water tank to continue to run for 2 minutes to clean up the residual debris inside.
Applicable environment
● Transmission medium temperature:<80 °
● PH value of transmission medium is 4-10
● The volume ratio of the solid phase in the transmission medium is below 2%
performance curve
Technical parameters
| Pump body part | Hydraulic motor section | Mounting dimensions | ||||||||
| Product Model | Outlet caliber (Mm) |
Flow (m3/h) |
lift (m) |
Granularity (Mm) |
Maximum pressure (Mpa) |
Maximum flow (L/min) |
Long (Mm) |
Wide (Mm) |
High (Mm) |
Weight (kg) |
| HZ-3E-100Z170 | 80 | 100 | 70 | 15 | 18 | 60 | 270 | 220 | 460 | 25 |
Recommended
Portable permanent magnet synchronous flood control pump, the pump body is compact, small in size, light in weight, high in efficiency and easy to carry.
Portable permanent magnet synchronous flood control pump, the pump body is compact, small in size, light in weight, high in efficiency and easy to carry.
Portable permanent magnet synchronous flood control pump, the pump body is compact, small in size, light in weight, high in efficiency and easy to carry.
Shanghetou Industrial Zone, Daxi Town, Wenling City, Taizhou City, Zhejiang Province